HydroPro, Inc. ^TM

Quality products tailored to the manufacture and repair of boilers and heat exchangers.

www.hpro.com

HOME

VESSEL TYPE

Shell & Tube Exchangers

Tube to Tubesheet Joining Tube Setting Prior to Expansion or Welding Sleeving Leak Testing Tube to Baffle Expansion

Feed Water Heaters

Tube to Tubesheet Joining Tube Setting Prior to Expansion or Welding Sleeving Leak Testing Tube to Baffle Expansion

Condensers

Tube to Tubesheet Joining Tube Setting Prior to Expansion or Welding Sleeving Leak Testing Tube to Baffle Expansion Tube to Fin Expansion

Boilers

Tube to Tubesheet Joining Tube Setting and Flaring Sleeving Leak Testing

Fin Fan Units

Tube to Tubesheet Joining Tube to Fin Expansion Tube Setting Prior to Expansion or Welding Sleeving Leak Testing

Air Heaters

Tube to Tubesheet Joining Partial Tube Replacement

Because Partial Tube Replacement is a very unique application, we ask that you contact us to discuss you particular needs. We have done partial tube replacement in units with tubes up to 6 inches in diameter. Partial tube replacement may be a good temporary solution for you to keep an older unit online while a longer term solution is being developed. Please contact HydroPro's Engineering Department with any questions you may have.

Tube Setting Prior to Expansion or Welding Sleeving

Sanitary and Pharmaceutical

Tube to Tubesheet Joining Tube Setting Prior to Expansion or Welding Leak Testing Tube to Baffle Expansion

Other

If your vessel type or application is not listed, please contact our service or engineering departments for further assistance. We have extensive experience in designing and manufacturing specialty tooling to handle unique applications ranging from 1/4 in. to 12 in diameters. Click here for contact information.

PRODUCTS

HydroPro HydroPro Tooling DeltaPro HydroProof SleevePro BoilerPro TubePro Tube Plugs

SERVICES

ENGINEERING

Sleeve Expansion Data Sheet

Contact:		Hydraulic Expansion End User:
Date:	07/04/2008	Phone:

SCOPE OF APPLICATION AND SPECIFICATIONS

New or Retube:

Type of Unit:

Heat Exchanger
Condenser
Feedwater Heater

Boiler
Other (Describe):

Number of Expansions:

Approximate Start Date:

PARENT TUBES

Material:		Wall Thickness/Gage:
Min. Yield:		Actual Tube ID Measurement:
Min. Tensile:		U-Bend or Straight:
O.D.:		Overall Tube Length:
Type:		Pitch:
Wall:		Hole Pattern:

Seal/Strength: Seal Strength
Setting of Tube to Tubesheet Primary Face:
Are the Tubes Welded to the Tubesheet?	Yes No

TUBESHEET

Total Thickness:	Clad?	Yes No
Material:	Shell Attached?	Yes No
Min. Yield:	Partition Plate?	Yes No
Min. Tensile:

Shortest Distance Between Hole Center Line and Shell/Plate (if applicable):

SLEEVE

Length:	Type:	(Seamless, Welded Drawn, etc.)
Material:	Inlet Shape:	(Straight, Rolled, Flared, etc.)
Wall Thickness/Gage:	Outlet Design:	(Straight, Chamferred, etc.)
Overall Length:

SPECIFICATIONS (IF APPLICABLE)

If you need to provide any additional drawings, sketches, blueprints, or performance requirements regarding working and test pressure of the vessel, please indicate below.

Will additional drawings be supplied? Yes No

HydroPro, Inc. TM

Quality products tailored to the manufacture and repair of boilers and heat exchangers.

www.hpro.com

Sleeve Expansion Data Sheet

HydroPro, Inc. ^TM