| From curved drums and headers to flat tubesheets, setup time is less than one minute by just one operator! |
|
Description
^ topHydroProof is the easiest, most advanced system for the hydrostatic testing of individual tube-to-tubesheet joints for boilers, condensers, feedwater heaters, heat exchangers, and air heaters. Using water under pressure, this lightweight and durable tool can hydro test up to 2,000 psi for tube sizes from 5/8" to 2.5" O.D.
With addition of the Full Tube Length HydroProof, it is now possible to test the integrity of a tube along its entire length, with the same ease of use and setup offered by the standard HydroProof.
For determining correct expansion procedures and periodic testing of expansion quality, the HydroProof is an essential part of any successful job.
Features
^ top- Lightweight: 5.5 lbs for a 2" tool.
- Easy to use and transport.
- For use on both curved drums and headers or flat tubesheets.
- Available for 5/8" through 2.5" O.D. tube sizes.
- Hydro test to 2,000 psi.
- Setup takes less than one minute by only one operator.
Applications
^ top
|
|
Full Length Tube Applications
^ top| Using the Full Tube Length version of the HydroProof, it is now possible to test the integrity of a tube along its entire length. A mandrel is inserted at either end of the tube, one for water-in, the other for water-out. |
|
HydroProof Power Supply
^ top| The HydroProof Power supply system can be either air or hand operated for accurate and repeatable hydrotest pressures up to 2,000 psi. Leaks are determined by observation of the tubejoint or a drop in pressure as indicated on the pressure gage of the power supply. |
|
Videos
^ top
Introduction Video Dial-Up (1 MB) High-Speed (15 MB) |
To view the videos you will need to have Windows Media Player installed on your computer.